Waterproofing primer for interior and exterior use
AquaShield NanoPrimer is an aqueous primer with a particle size of the order of 30nm, high penetrating ability and enhanced waterproofing. After applying it to an absorbent substrate, it makes it compact without, however, creating a surface film. Τhereby, it increases the accretion of dyes, tile adhesive and cement mortars to absorbent surfaces, resulting in a uniform dyeing and at the same time enhanced waterproofing. At the same time, AquaShield NanoPrimer improves the elasticity of the substrate by preventing micro-cracks.
The surfaces must be clean and free of any type of dirt (dust, oil, grease, rust, soap, etc.) and absolutely dry. Aquashield Porus is ready to use. Apply the material to the surface with a brush, roller or spray. Allow the surface to dry and then apply the dye. Tools and containers used should be washed immediately with clean water.
12m/L depending on the surface's absorption and porosity
High penetrating ability
Increased adhesion of the dye to the substrate
Reinforcement of old surfaces
Protection from mold and fungi